Detailed outdoor mapping of earthworks, sites, parks and public areas up to 10m, showing drain pipes, electrical lines, fibre lines and more.

A non-destructive surface penetrating system that measures slab thickness and maps reinforcement, post and pre-tension cables, live wires, service lines, pipes and drains.

Locate sub-surface targets in concrete to assess strength, durability, slab thickness and the severity of honey combing and delaminations.

This determines the extent of the corrosion of reinforcement within a concrete structure.

Evaluate the pull-off strength (adhesion) of a coating from a rigid substrate such as a concrete or metal floor.

A test rig is attached to a bolt, screw, anchor or fixing and put under tension to the designed stress load level to determine how strong and secure the fixing is.

Determining the reinforcing depth in an existing concrete structure with the use of an ferromagnetic meter.

Used to determine the exact diameter of reinforcement bars in concrete through the use of an elcometer.

A test to investigate crack width on a variety of concrete structures using photographic recording with a micron.

This device measures the elastic properties or strength of concrete or rock, mainly surface hardness and penetration resistance.

Monitors the heat flow from concrete while the specimen is under an insulated condition and has no or very little heat loss.

Generate accurate topographical maps or 3D models of larger / hard to access areas using LIDAR technology.